Automotive Manual PDF

STOCK EXHAUST SYSTEM REMOVAL
1. Remove frame cover.
2. Remove right side footpeg assembly held in place by two bolts (Figure 1).
3. Remove exhaust port nuts.
4. Remove bolts securing rear muffler to exhaust system mounting bracket.
5. Remove complete exhaust system. Begin by lifting muffler out of mounting bracket locating hole (assistance may be required).
6. Check condition of stock exhaust gaskets. Replace if damaged or worn.
7. Remove two bolts attaching stock exhaust mounting bracket to frame.
(more…)

[Read more →]

Before Installation:
• Verify that all parts and accessories have been included (see list below).
• Coat all exhaust pipe mating joints with anti-seize compound / lubricant (Finish Line Ti-Prep packet included).
• Read and review these instructions, cautions, diagrams and images prior to starting any work.
1. Remove the lower fairing. Remove the lower radiator mounting bolts, loosen the upper bolts and pivot the radiator forward to provide access to the exhaust nuts (flange nuts). Remove the oil cooler mounting bolts and pivot the oil cooler forward to provide access.
(more…)

[Read more →]