Automotive Manual PDF

Tools Required For Installation:
Flat Head Screwdriver
8mm, 10mm Socket
Ratchet & Extension
3/32”, 5/32” Allen Wrench
#T20 Security bit (Included)
1. Disconnect the negative battery cable. Disconnect the Mass Air Flow (MAF) sensor wiring harness. Using the supplied T-20 Security bit, remove the two screws and the Mass Air Flow sensor from the tube (save the sensor for reuse). Loosen the hose clamps on each end of the factory intake tube assembly.
(more…)

[Read more →]

A computer tune specific for this intake is required when installing this kit. Failure to add a tune specific for the JLT intake may result in major engine damage. ***DO NOT INSTALL KIT AND DRIVE WITHOUT A TUNE! ***
Please review complete instructions prior to installing.
Step#
1. Verify you have all of the following parts included in the kit: (1) 4″-3.5″ 90 degree Rubber Reducing Elbow, (1) JLT Billet MAF housing, (2) MAF screws, (1) S&B Oval Air Filter, (1) 056 Clamp, (1) 072 Clamp, (1) PCV hose, (1) JLT heat shield (2) Heat Shield Bolts Optional part: SCT Tuner
(more…)

[Read more →]

We hope you are satisfied with the look and performance. You may use any polish or wax on the pipe as it’s painted with the same high quality paint as your car. It is also recommended to use some tire shine on the rubber elbow. Take your time and it will be a smooth install. Please review complete instructions prior to installing.

Step#
1 Verify you have all of the following parts included in the kit: (1) JLT Painted Pipe with IAC, PVC, and Vacuum line fittings, (1) 45 degree Rubber Elbow w/ clamps to connect throttle body to JLT Pipe, (1) Silicone Reducer w/ clamps to connect JLT pipe to MAF, (1) JLT heat shield, (1) Billet MAF Adaptor with bolts, (1) 4×12” S&B Air Filter, (1) 5/8” Hose, (1) 3/4” Hose, (1) Vacuum Line, (1) Silicone Spacer (for use on early Lightnings with 80mm MAF only)
(more…)

[Read more →]

This manual contains the instructions needed to operate and maintain your new engine. Please read this manual completely to obtain maximum performance and reliability from your new Team Associated engine. Pay special attention to the break-in instructions outlined in this manual. The engine must be broken in to achieve maximum performance. Follow the directions in this manual exactly.
(more…)

[Read more →]

Aux-in Accessory for 2002-04 Subaru WRX, & Impreza Radios (P-123)
Installation Instructions
First check that your package includes everything listed below for proper installation.
Package Contents:
- Aux-in Accessory Board
- 8″ 15-wire ribbon cable (plugged into board)
- Silent CD
- This installation manual
Throughout this install, there are steps that require the use of tools.
(more…)

[Read more →]

To suit DODGE vehicle model years: 2002 current Ram Will not fit Dodge Ram 3/4 (2500) and 1 ton (3500) Model Year 2002 vehicles. Par t # 1440352 Version # 1 Issued 9 May 05 Congratulations on choosing the Telescopic Trailer Tow Mirror by Schefenacker! Made by the world s largest manufacturer of exterior mirrors, the Telescopic Trailer Tow Mirror combines great looking aerodynamic styling with the toughness only a company like Schefenacker can produce. You ve chosen one of the hottest new products in the past few years! Its interchangeable covers mean you can personalize the looks that suit you and your pick up, and a wide range of options mean you can have the right equipment for the right job.
(more…)

[Read more →]