These components are designed to improve the exhaust efficiency of the GM C.P.I. (Central Port Injection) V8 engine. This system does not require welding for installation and retains all O.E.M. emissions equipment. These Edelbrock headers are street legal in all 50 states.
Suggested Tools Needed for Installation. This vehicle has metric fasteners:
- 3/8″ ratchet socket set with extensions and universal 13mm and 15mm swivel sockets
- Set of combination wrenches
- Jackstands, screwdrivers, pliers, crescent wrench, etc.
- Liquid penetrant, (GM #1052627) anti-seize compound (GM #5613695) or available equivalent.
(more…)
2003-2008 Hummer II 6.0L V8 without A.I.R. or E.G.R Edelbrock Header Installation Instructions
February 12th, 2010 · No Comments
2002-04 Honda Civic Si Race Header Installation Instructions
November 27th, 2009 · No Comments
Tools Needed: 10, 12, 14 sockets and wrenches. You will also need a Oxygen Sensor removal tool or 22mm wrench or socket to remove the stock Oxygen sensors from the catalytic converter and install them in the new Jackson Racing header. Most of these tools are available at your local hardware or auto parts store.
IF YOU ARE NOT A COMPETENT MECHANIC, DO NOT ATTEMPT THIS INSTALLATION! ALLOW AT LEAST ONE HOUR FOR THE EXHAUST SYSTEM TO COOLBEFORE DOING ANY EXHAUST SYSTEM INSTALLATION WORK.
READ THESE INSTRUCTIONS THOROUGHLY! Follow the instruction STEP-BY-STEP, and your installation will be trouble free. If in doubt, CALL!
(more…)
1979-1987 Chev/GMC Pick Up EdelBrock Header Installation Instruction
September 2nd, 2009 · No Comments
Before beginning installation of your new shorty headers, you will need to first determine whether or not these shorty headers will fit your vehicle without additional modifications to your factory stock exhaust system. GM used several different styles of exhaust manifolds on the model year vehicles listed above.
(more…)
2002-2005 Subaru WRX Stainless Steel Header Installation Manual
May 24th, 2008 · No Comments
Precision manufactured using aircraft quality T-304 stainless steel; this header is designed to endure years of heavy use. Installing the Borla Performance Stainless Steel Header on your vehicle will eliminate the restrictive design of the stock exhaust manifolds, allowing your engine to discharge exhaust gas easier. The result is more horsepower and torque and longer engine life, with easy bolt-on installation. These installation instructions have been written to help you in the installation of your Borla Performance Stainless Steel Header. Please read it completely before attempting installation.
(more…)
