Automotive Manual PDF

On most models, access to the 3-pin plug of the headlamp is possible simply by reaching it from underneath the front fairing or from behind the dash. There is usually a rubber splash cover over the 3-pin plug, which has to be peeled back. Installation is simple: unplug the headlamp, insert pathBlazer, and then re-connect the 3-pin plug.
(more…)

[Read more →]

1. Before beginning installation be sure to wear proper eye protection.
2. Remove the grille shell from the vehicle. Open the hood and remove the black ABS cover from grille to the radiator shroud. Remove the 8 phillips head screws on the retaining clips, lift cover up and remove the retaining clips.
3. Remove the turn signal / parking lamp assemblies by removing the 7MM head bolt at the inside corners behind each lamp. Grasp lamp and pull straight forward to remove. Lift the locking tabs on bulb socket and turn 1/4 turn CCW to remove.
(more…)

[Read more →]

Overview of process
1. Mount Heating Unit
2. Run wiring harness into vehicle
3. Connect coolant hoses
4. Mount fuel pump and run fuel lines
5. Route wires inside vehicle and make final connections
6. Tap fuel via sending unit
(more…)

[Read more →]