Automotive Manual PDF

Tools/Supplies: Phillips screwdriver, windscreen, maybe glue
Step 1­ Remove the 2 screws just below the “HONDA” decal on the front cowl (just below the windscreen).
Step 2 ­ Remove the 2 screws on the pillars that connect the sides of the windscreen to the scooter (1 screw on each pillar, screw heads face driver)
(more…)

[Read more →]

Time and Ease: Medium difficulty ­ 1­2 hours Tools/Supplies: Wire cutters/strippers, small rotary tool (Dremel), screwdriver, 10 or 15 amp inline fuse, 12v marine outlet with extra wire (Walmart), end connectors that will fit around your battery terminals
Step 1 ­ Open your glove box and locate the dimple or hole in the middle, where the outlet is already on the Forza version. (see photo section) Step 2 ­ If there is a hole already, try fitting the outlet in it. Doesn’t fit or no hole? Try grinding out some of the plastic with a Dremel or rotary tool. BE CAREFUL! You don’t want to grind out too much.
(more…)

[Read more →]