Preparation:
a) Lock rear parking brake on quad, turn gas petcock to Off and stand quad upright on the rear grab bar. Make sure vehicle is secure and will not fall over while installing your new skid plate.
b) Remove OEM bolts mounting the OEM Frame Cover to the Frame using a 10mm socket wrench. You may discard the OEM mounting bolts and plastic frame cover.
(more…)
HONDA TRX450R Frame Skid Plate Installation Instructions
November 8th, 2009 · No Comments
Honda TRX450R Installation Procedure
October 29th, 2009 · No Comments
REAR SETUP (45” hose)
STEP 1: Lift the vehicle off the ground with a jack or on a stand. Remove the stock shock absorber from the vehicle. Install the Elka shock absorbers on the vehicle. The banjo bolt must face towards the front of the vehicle with the hose coming out on the left side. The rebound adjuster located at the bottom of the shock should face the rear of the quad for convenient access. The bottom fork of the shock can be turned 180° clockwise if needed.
(more…)
