Automotive Manual PDF

RSS Feed

The Resources for Automotive

Ford Ranger Rear Stabilizer Bar Installation Instructions

July 26th, 2009 · No Comments

Before beginning installation be sure to set the parking brake and chock the wheels.
To ease installation and properly adjust the bar, the weight of the vehicle must be on the suspension as if driving down the road. Do not raise the vehicle by the frame.
1. Lubricate the D-bushings and place them onto the straight areas of the bar on each side of the center hump as shown in the photos.

[

1988 Toyota Celica Cluth

September 18th, 2008 · No Comments

Clutch is a single, dry disc type using a hydraulically operated master cylinder and clutch housing mounted slave cylinder. On Land Cruiser, slave cylinder is adjustable. On all others, slave cylinder is nonadjustable. Clearance is automatically compensated by internal design of cylinder.

Rotate pedal stop bolt at top of pedal assembly to adjust pedal height. To adjust free play, loosen lock nut on master cylinder push rod and turn push rod in or out to specified free play. See CLUTCH PEDAL SPECIFICATIONS TABLE. Tighten lock nut.

[