The Dyna III Electronic Ignition System has been designed for easy installation and does not require the use of special tools. The compact electronic module operates efficiently and was designed to clamp to a frame tube. It can be located anywhere that there is sufficient space, and does not require special considerations as it is completely vibration and water proof. The recommended location is on the left frame tube under the fuel tank. The DYNA III System was designed for use with stock coils. however. it may be used with other coils that have at least THREE OHMS primary resistance.
(more…)
DYNA III Electronic Ignition Installation Instructions
February 14th, 2009 · No Comments
DUCATI - IGNIJET 2007
February 10th, 2009 · No Comments
“ENGINE” CONNECTOR
1. Unconnected
2. Unconnected
3. TPS throttle position sensor
The input is designed for standard TPS sensors used in motorcycles. It is designed to take voltage of 0 to 5 V. Specific settings of the sensor for particular types of motorcycles are included in the DUCATI.EXE software. The TPS is powered by the means of reference voltage + 5V and SENSE GND. The output of the sensor will be connected to the connector (3ENG).
4. Unconnected
5. TWS water temperature sensor
(more…)
2000 Mazda MX-5 Workshop Manual
August 5th, 2008 · No Comments
For proper repair and maintenance a thorough familiarisation with this manual is important and it should always be kept in a handy place for quick and easy reference. All the contents of this manual, including drawing and specifications, are the latest available at the time of printing. As modifications affecting repair or maintenance occur, relevant information supplementary to this volume will be made available at Authorised Mazda dealers. This manual should be kept up-to-date. Mazda Motor Corporation reserves the right to alter the specifications and contents of this manual without obligation or advance notice.
(more…)
