Automotive Manual PDF

This product is a great fit for stock bikes with exhaust and intake mods. It is also capable of handling the fuel needs of big bore kits, light cams, and a variety of head porting. This is an Electronic Jet Kit. Like jet kits in the past, the more you modify, the more responsibility you take in getting your fuel curve right. Going to www.dobeckperformance.com will help you obtain better high horsepower tuning.
(more…)

[Read more →]

Preparation
1. Turn off car engine and remove key from ignition
2. Un-mount your radio from the dash in order to get access to the back side of the radio.

Adapter installation
3. Attach square 14 pins connector to the back of the Honda stereo.
4. Find a place where you can place Car2PC. In many cars there is enough room in the dash to place Car2PC.
Note: Make sure you mount Car2PC in a place with enough room so when you mount the car stereo back you do not break the adapter
(more…)

[Read more →]

In diesel vehicles it is necessary to interface with the wire that turns on the WAIT TO START light in the dash- board. This wire illuminates the bulb until the vehicle’s glow plugs are properly heated. When the light goes out the vehicle can be started. This wire is always available at the connector leading to the bulb in the dashboard. It can also be found at the Engine Control Module (ECM) in many vehicles.
(more…)

[Read more →]

1. Before working, please make sure the vehicle power is off (please keep in mind when pulling out the key, only monitor supply would be off but whole vehicle power supply would be off 5 minutes later)
2. Starting with separating of the monitor and the connecter removed in working may causes a error code. Do not start until the work is done.
(more…)

[Read more →]

The step for this BMW E65/66 Interface Installation Manual:
Caution before working
1. Before installation, be sure to key off and wait more than 5 minutes for complete discharge of electricity
2. Don’t turn on the ignition during connectors are disconnected, because if you turn on the ignition with disconnected connectors, ECU falsely recognize status of car as an error and display error code on monitor
(more…)

[Read more →]

HiTV M3000 Motorised LCD Screen, the factory integration head unit system. HiTV M3000 will provide you with comfortable and safe driving environment. Review this owner’s manual thoroughly prior to operation will provide you with the best performance and help explain the simple requirements for proper care.
(more…)

[Read more →]