1. Raise vehicle and support with jackstands on a stable surface.
Note: Vehicle must be supported with vehicle’s normal weight on rear axle. Do not support vehicle by its trailing arms.
2. Remove only one of the stock lower trailing arms.
3. Install the Edelbrock lower trailing arms with the spherical ball at the rear axle mounting point and the grease fitting on top of the arm. It may be necessary to spread the rear end mounting tabs slightly to install trailing arm.
(more…)
2003-2005 Hummer HII Edelbrock Lower Trailing Arms Installation Instructions
February 12th, 2010 · No Comments
92-01 Honda Prelude Rear Kit Part Installation
November 17th, 2009 · No Comments
Always keep safety in mind when working on your vehicle. Completely read these instructions before installing the kit.
I. Preparing the Vehicle
1. Jack the vehicle up and support the body on jackstands.
2. Remove the rear wheels (Figure 1).
(more…)
1994-2001 Acura Integra GSR Pro-Flo Header
November 15th, 2008 · No Comments
Edelbrock Pro-Flo header components are designed to improve the exhaust efficiency of the Acura 1.8L engine. A performance gain can be expected with the installation of the system. This system requires no welding fo installation and retains all stock emissions equipment. Suggested tools needed for installation: This vehicle has some metric fasteners.
(more…)
