Automotive Manual PDF

Materials:
(1) Plastic Epoxy (fast setting type) I used Loctite Plastic Epoxy (sets in 7 minutes)
(2) 1 foot of ¾ inch (ID) radiator/heater hose. You only need about 3” but this is the minimum you could buy at the Autozone.
(3) Heater connectors (see below) I got mine from the Autozone, but you could use a similar item I guess. These fit perfectly in the existing hole on the valve which is handy… just as an fyi. (Help part number: 47065)
(4) Minimum Two hose clamps sized for the heater hose. You can get more if you want to clamp everything down, like I did.
(5) Some carburator cleaner.
(more…)

[Read more →]