INSTALLATION
1. Before installing the TFI you must first disconnect the negative lead from the battery.
2. Determine a location for the TFI unit. Suggested locations are as follows: Under the seat, behind a side cover or tail section.
3. The TFI comes with a harness with injector connectors that match the factory injector connectors.
4. Locate the factory fuel injectors (see owners manual if you are not sure)*.
(more…)
Honda/Kawasaki/Suzuki/Yamaha Electronic Jet Kit Instructions
November 13th, 2009 · No Comments
AviStart 3000 Installation Guide
October 26th, 2008 · No Comments
The starter wire provides 12V directly to the starter or to a relay controlling starter. In some vehicles, it is necessary to power a cold start circuit. A cold start circuit will test exactly like a starter circuit, but it does not control the starter. Instead, the cold start circuit is used to prime the fuel injection system for starting when the vehicle is cold.
(more…)
