Automotive Manual PDF

RSS Feed

The Resources for Automotive

1988-1998 Chevy Silverado & GMC Sierra Hog Bar Installation Instructions

August 29th, 2009 · No Comments

Pre-installation Preparation
1. Verify kit contents.
2. Remove protective wrapping from hog bar
and place on a non-abrasive surface.
3. Remove the brackets and hardware from
the box.
B. Remove Tow Hooks
1. Locate the Bolts that hold the tow hooks in
place we will be using these bolts for the
brackets.
2. Remove the bolts that hold the tow hooks
in place by using an 18mm socket these
bolts are threaded into a plate on the inside
of the frame.
C. Install Brackets
1. Begin to mount the brackets in place where
you removed the tow hooks shown in (fig.
C1) using the bolts you removed in step
two.
IMPORTANT: Make sure you leave
these bolts loose.
D. Install Hog Bar
1. You will need to remove your license plate
so you can attach it to the front of your hog
bar.
2. Place hog bar up to the brackets and threadthe bolt with washer into the hog bar.
3. Tighten the bolts that mount from the bracket to the hog bar for both sides.
4. Center the Hog Bar on the truck.
5. Tighten the bolts that hold the bracket to the frame of the truck for both sides.
6. Make sure all bolts are tight & license plate is secured to the front of the hog bar.

Get pdf 1988-1998 Chevy Silverado & GMC Sierra Hog Bar Installation Instructions

[Read more →]

Brake & Torque Converter Controller Installation and Operation Manual

March 30th, 2009 · No Comments

Exhaust Brake and/or Torque Converter Controller Kit Contents
• Integrated Control Module.
• Harness with labeled connections for a hassle-free install. Every possible convenience was included in the harnessing to ensure an easy installation experience.
• Small Parts Bag. A baggie containing fuse taps, taps, connectors, and zip-ties and such has been included to aid your installation.
• Optional Plug in Kits for your model year and make vehicle (if purchased with unit) (may also be purchased after initial sale)
(more…)

[Read more →]

1995-1997 Toyota Land Cruiser Supercharger Kit Installation Instructions

September 12th, 2008 · No Comments

You have just purchased a Kazuma Supercharger System for your Toyota Land Cruiser. After installing this kit, we know you will enjoy the benefits this product has to offer for many miles to come. If you’re planning to operate your supercharged Land Cruiser on the street, you must not make any modifications to the system as delivered nor to the installation methods/procedures outlined in this document in order to maintain any warranty or emission certification.
(more…)

[Read more →]