These instructions explain the procedure required to mount either the Windjammer IV or Vindicator II fairing to your motorcycle. We urge you to follow the preparation and assembly sequence from start to finish. This will benefit you directly in several ways:
1) You will be assured the fairing is properly installed and is immediately ready for operation.
2) You will minimize unnecessary confusion, moaning and scraped knuckles.
3) You will protect your investment by doing it right, and
4) With the confidence that nothing has been overlooked, you won’t have to waste time backtracking to correct mistakes. That’s time you could spend riding.
(more…)
1975-79 Honda GL 1000 Windjammer IV Vindicator II Mounting Instructions
November 16th, 2009 · No Comments
99-up Chevy/GMC Truck Tailgate Cap Instructions
October 16th, 2009 · No Comments
1. Remove the factory plastic tailgate cap.
A. Remove any tape residue from the truck by wrapping a cloth shop towel or terry cloth rag tightly around knuckles and push firmly against remaining tape.
B. Remove any remaining glue or dirt with Naptha, Paint Thinner or Adhesive Remover. Then clean surface with Isopropyl alcohol and wipe clean.
C. If you have purchased the gray smooth paintable Tailgate Cap go to step 2; if you have purchased the black textured Tailgate Cap go to step 3.
(more…)
