Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove throttle body intake cover.
3. Remove air intake hose assembly.
4. Remove (4) bolts from the throttle body.
5. Remove throttle linkage bracket and save screws. (Ref. “B” & “C”)
(more…)
01-03 Ford Ranger/SportTrac 4.0L SOHC PowerAid Throttle Body Spacer
July 12th, 2009 · No Comments
AT 500 Instruction Manual
October 29th, 2008 · No Comments
MOUNTING THE AT 500 TO YOUR BENCH
Place your AT 500 on the edge of a sturdy bench or table where you plan to mount it. Give yourself about 12 inches of work space on each side of the machine to allow room for components.
Using the machine itself as a template, mark and drill four 1/4” holes in your bench and bolt your AT 500 securely to it.
Avoid using wood or lag screws to mount your reloader to the bench. These types of screws can loosen over time.
(more…)
