Automotive Manual PDF

RSS Feed

The Resources for Automotive

How much it is to re-seal a Cadillac Seville northstar engine?

December 28th, 2010 · No Comments

its a 97 cadillac seville sts, engine runs excellent, very sporty, very fast, just leaks oil pretty bad, about a qt. every 4 days, its a beautiful car, I drove it from detroit, MI to anch, alaska, over time its developed a nasty leak, I had the oil coolant lines replaced, still leaks, even though they said that would stop it.
Im thinking its a main seal, its seem to be coming from the front passenger side which is where the belt line is, I was thinking of just taking it in and having em pull the engine and re-seal it, but Im also thinking worst case scenerio here, it may not be.
(more…)

[Read more →]

How do I get rid of the musky smell that circulates when I start my Volkswagen Passat?

December 25th, 2010 · No Comments

Especially in hot weather, my Passat stinks with a musky/rotten smell coming out of the air vents. I have changed the air filter, and that decreased the smell for a few weeks. I did do a search online for similar problems leading me to search for leaks or damage, but haven’t seen any. I love my car, but HATE the stench.
(more…)

[Read more →]

2005 Nissan Altima engine won’t start until second turn of the key

December 23rd, 2010 · No Comments

The problem just started today. I turn the key and the engine won’t start now longer how long I let the starter go. It’s only until I turn the key the second time when the car starts, but I do have to turn the key longer than normal for it to turn on.
(more…)

[Read more →]

Where can i find an on line print out on how to install a radiator on a 97 BMW z3 roadster?

December 20th, 2010 · No Comments

my radiator blew up on me this last sat. i purchased a radiator and will recieve it tommorow. i do not have a owners manual, and it will take to long to order one. I was hoping someone would know a web site that might actually have installation instructions. Thank you for your time… i will reward top answer. please NO negative comments they are a waste of your time.
(more…)

[Read more →]

98 Nissan Sentra Emergency Brake Light Staying Lit?

December 17th, 2010 · No Comments

Emergency brake is released, why would this light stay on? Unfortunately we bought this car used and don’t have the manual.
(more…)

[Read more →]

Questions about replacing Toyota Truck Engine?

December 17th, 2010 · No Comments

Problem: I have a Toyota Truck that needs the engine replaced that has been parked for about a year. What should I reasonably expect to pay to have the engine replaced? What else should I expect to have to do to get this truck running again after it has been sitting for so long and how much might I expect to pay for that?
(more…)

[Read more →]

TUbliss Installation Instructions

November 2nd, 2009 · No Comments

First time installation will require drilling a 10mm hole in your rim. After the TUbliss Core is installed on the rim, it stays on the rim. It’s not necessary, nor recommended, to remove it when changing tires. We recommend installing TUbliss on new tires that have never been mounted. OEM rim locks leave impressions on the inside of your old tire and any tears or damage from a previous installation may cause leaks or other problems.
(more…)

[Read more →]

Expansion Valve Kits XVB18-36C, XVB42-60C, XV18-36C, XV42-60C Installation Instructions

October 26th, 2009 · No Comments

Piston must be removed from the Flowrator Distributor Assembly for proper Expansion Valve operation.
To remove piston from Flowrator Distributor Assembly :
1. Loosen the 13/16 nut 1 TURN ONLY, relief pressure. No pressure loss
2. indicates possible leak.
3. Remove the nut and discard the black seal.
4. Remove the check piston and discard.
5. Use a tube cutter to remove the spin closure on the suction line.
(more…)

[Read more →]

2004–2008 GMC Duramax 6.6 Fitch Part # F7582028BD, F75836BD

October 21st, 2009 · No Comments

Do not smoke or be near open flame while performing installation. Wear eye protection as the fuel system is under pressure.
Kit includes
• Installation bracket, fuel line disconnect tool, and cable/zip ties.
• EFI multi port fuel injection hose and fuel line quick connect fittings.

Installation Procedure
• Unscrew the gas cap to release residual pressure in the fuel system.
• Locate the fuel RETURN line (smaller of the 2 lines) containing the fuel line quick connect fitting. This connection is located at the rear of the engine near the fire wall on the driver’s side. This kit is designed for mounting location of the driver’s side stud on the master brake cylinder stud.
(more…)

[Read more →]

2001–2003 GMC Duramax 6.6 Fitch Part # F758186BD Installation Instructions

October 19th, 2009 · No Comments

Do not smoke or be near open flame while performing installation. Wear eye protection as the fuel system is under pressure.
Kit includes
• Installation bracket, fuel line disconnect tool, and cable/zip ties.
• EFI multi port fuel injection hose and fuel line quick connect fittings.

Installation Procedure
• Screw the 90* fittings into the top and bottom of the Fitch unit. Tighten down the lock nut on the 90* fittings.
• Using the 18” hose with the female plastic fitting, screw the opposite end to the 90* fitting at the top of the Fitch unit and the 6” male hose to the bottom of the Fitch unit.
(more…)

[Read more →]