Park/Brake:
1. Unplug 3 connections from back of factory tail light
2. Connect to LED tail light with the following configuration:
Green/Black - Black (Ground)
Green - White (Brake)
Black - Red (Park)
Note: Color may differ on various years. If the configuration is not correct simply swap the wires around until the tail light functions properly.
(more…)
03-09 Honda Ruckus NPS50 Sequential LED Tail Light Installation Guide
October 28th, 2009 · No Comments
H2 Hummer Spare Tire Carrier Mounting Instructions
September 5th, 2008 · No Comments
H2 Hummer Spare Tire Carrier Mounting Instructions
1. Remove both tow loops from rear bumper with 18 MM socket.
2. Remove hinge plate from packaged swing arm assembly. To aid in positioning and support of hinge plate during installation, insert one M12 X 70MM bolt into a driver’s side tow hook mounting hole. The hinge plate can now be temporarily “hung” on the bolt (head of bolt will fit through hole in hinge plate). The hinge plate should be oriented with hinge boss towards passenger’s side (see Photo 1).
(more…)
