Install Galfer Brake lines after HeliBars® are installed. Carefully follow their instructions.
A. Before the factory bars are removed:
1. Carefully loosen the clutch hydraulic line banjo bolt at the clutch master cylinder just enough to rotate the steel banjo fitting forward. (See photo A for positioning). Additional fine adjustments may be required after installation of HeliBars. This modification is necessary for the new bar location / hydraulic line clearance.
(more…)
2004-2008 Honda CBR1000RR Galfer Brake lines Installation Instructions
November 11th, 2009 · No Comments
2005-2007 Ford Mustang GT, Coupe & Convertible Pro-Kit Installation Instructions
August 22nd, 2009 · No Comments
Read All Instructions Before Beginning Installation
• Installation of a PRO-KIT Spring set should only be performed by a qualified mechanic experienced in the installation and removal of suspension springs.
• Use of a hoist is highly recommended and will substantially reduce installation time.
• Never work on or under a vehicle unless it is properly supported by safety stands and wheels are blocked.
• PRO-KIT Springs are marked with 01 and 02 (located at the end of the part number) designating front and rear spring respectively.
(more…)
