Automotive Manual PDF

RSS Feed

The Resources for Automotive


August 4th, 2010 · No Comments

WIRING INFORMATION: 1991 Ford Tempo WIRE WIRE COLOR WIRE LOCATION 12V CONSTANT WIRE YELLOW Ignition harness STARTER WIRE WHITE/PINK Ignition harness 12V IGNITION WIRE RED/LT.GREEN Ignition harness ACCESSORY WIRE GRAY/YELLOW Ignition harness POWER DOOR LOCK (5-wire reverse PINK/YELLOW Harness In Driver’s Kick Panel polarity POWER DOOR UNLOCK (5-wire reverse PINK/GREEN Harness In Driver’s Kick Panel polarity PARKING LIGHTS (+) BROWN At Headlight Switch Or Harness In Driver’s Kick Panel DOOR TRIGGER (+) BLACK/BLUE At Courtesy Light Under Dash TRUNK RELEASE (+) PURPLE/YELLOW At Trunk Release Switch TACHOMETER WIRE TAN/YELLOW At Ignition Coil (more…)

[

1997-2002 Ford Expedition/Navigator Secure Idle Installation Instructions

July 28th, 2009 · No Comments

“SECURE IDLE” is an ignition switch bypass device designed to provide all the electrical functions that the OEM ignition switch normally provides. For proper operation and long term performance, do not deviate from the wire connection instruction. For each wire connection, remove approximately one half inch of insulation from the OEM wire, but DO NOT cut the wire into. Cutting the wires causes high resistance and a possible failure point. Strip app. one half inch of insulation from the end of the “SECURE IDLE” wires to be attached to the OEM wires. Wrap the “SECURE IDLE” wire around the bare area of the OEM wire and solder the connection. Tape the connection thoroughly after it cools.

[