Automotive Manual PDF

Installation Instructions
1. After bike is cool make sure the bike is secured before beginning the installation.
2. Remove the right side fairing (refer to the owners manual for more information on removal).
3. Remove the stock exhaust from the bike. Unbolt the exhaust mount on the rear peg and loosen the collector clamp and remove the stock system.
4. Attach the LOR exhaust canister to the slip-on tube adapter with the spring tabs aligned (make sure your hands are protected with a pair of gloves in case the tubes slip). You may have to squeeze the mid-pipe adapter tube to fit into the exhaust inlet as the mandrel bends may become slightly out of round due to a cut near the bend (the tube will take form once connected). Slide the canister all the way until the slip-on adapter seats fully against the exhaust inlet. Wipe off any excess silicone.
(more…)

[Read more →]

1 After bike is cool make sure the bike is secured before beginning the installation.
2 Remove the right side lower fairing bolts and pull the fairing out from the push pin/rubber connector.
3 Fully loosen the muffler clamp from the header collector.
4 Remove the 3 muffler mounting bolts (2 on the right side, 1 on the left side).
5 Carefully remove the stock muffler and place in a safe location.
(more…)

[Read more →]