Take care to follow the above diagram.
There are two leds located on the PCB, a GREEN and YELLOW. Their purpose is to aid the initial installation. A direction change is indicated with the leds. Ensure the wire pairs of the electric motors are correct (in the same direction) or the mirrors will operate opposite to each other (Match mirror connections to same connection on PCB). The unit can be triggered from any momentary normally OPEN contact (actuating trigger voltage 9V - 15V). This can be manually via a switch or electronically such as a car alarm.
(more…)
Honda CRX Folding Mirror Unit Installation
November 21st, 2009 · No Comments
1999-2004 Ford F-250 / F-350 V8, V10 & Diesel 2.5” Leveling Kit Installation Instructions
April 27th, 2009 · No Comments
Jack-it, Inc. strongly recommends this kit be installed by a professional mechanic. Installing this kit will not strengthen or reinforce the stock frame of the vehicle, nor will it increase rollover protection. This kit is designed to level the front end of the vehicle in relation to the height of the rear end. We strongly advise you to operate your vehicle responsibly at all times and that you periodically inspect all suspension and drive train components for tightness of fit or for any damage.
(more…)
Hummer H2 Spare Tire Cover Installation Instructions
August 6th, 2008 · No Comments
Thank you for the purchase of your new Hummer H2 spare tire cover. Please inspect your package contents before beginning installation. Included should be a molded faceplate and stainless steel retaining ring with locking mechanism. The stainless steel ring is covered with a protective vinyl cover that should not be removed until installation is completed.
(more…)
