Prepare for the installation.
• If possible, install the SWI-ALP while you are installing the new head unit. Keep in mind you may need to plug in the factory stereo to locate certain wires; therefore do not complete the head unit installation until the SWI-ALP is working properly.
• Plan a general installation location for both the SWI-ALP plug and the control body. Keep in mind that the supplied wire harness is two feet long, and the 1/8″ plug harness is three feet long.
• Use a multimeter or approved measuring device for checking vehicle circuits
(more…)
SWI-ALP Universal Steering Wheel Control Interface Instructions
November 27th, 2009 · No Comments
Rev Speed Meter Instruction Manual
November 5th, 2009 · No Comments
The RSM (Rev Speed Meter) is a multi function measuring device designed to measure and monitor vehicle speed, RPM, 0-400m time, mid range acceleration, estimated horsepower, as well as acceleration G.(Using optional G Sensor)
- Easy to Read VFD (Vacuum Fluorescent Display)
The RSM utilizes and easy to read VFD screen in a highly stylish case which also complements the cockpit interior.
Due to the 3 row 7 segment LED screen used on the previous model, we were only able to display a limited amout of information on screen. Now with the new dot matrix VFD screen, we are able to display multiple types of data in multiple for mats. In addition, we are also able to display the data in graph mode, and analog modes to ensure that the driver is properly informed.
(more…)
