Automotive Manual PDF

Adjusting the Control Unit
• Use a small flat-tip screwdriver to change the mode switch and the horn/siren switch and to adjust sensitivity
Mode Switch:
• Set the mode switch according to the customer’s choice.
• Refer to the Owner’s Manual for the explanation of each mode.
Horn/Siren Switch:
• Set the switch to “HORN” in normal use. If an optional siren is installed, set the switch to “SIREN.”
(more…)

[Read more →]

BMW key programming device and software are for vehicles equiped with EWS module , coverage 1994-2004 that have EWS module(including EWS2, EWS3 and EWS3+, Rover75, MINI, RangeRover, FreeLander, Discovery).You can programm new keys when all keys are lost or stolen by this device. Of cause be able to add new keys.
(more…)

[Read more →]

Mounting the Vacuum Reservoir (10067563)
1. Take out the windshield washer fluid bottle from passenger side by removing the two 10-mm nuts holding it in place.
2. Remove the clutch master cylinder reservoir by popping out the two push clips that attach it to the bracket.
3. The vacuum reservoir is going to be mounted upside-down on the cowl wall with the Amp opening on the top and the Main opening on the bottom.
4. Mount the reservoir using a rivet gun and two 3/16-in rivets, making sure it is not in contact with the hood release or clutch master cylinder reservoir bracket.
5. Replace the clutch master cylinder reservoir by snapping the two push clips back into place.
(more…)

[Read more →]