Installation of this product requires the stock shifter to be cut, and re-installation of the stock shifter requires welding. It’s preferable to park on a flat surface, as you will have to engage and disengage the hand brake and shift from gears to neutral. If you can’t do so and are obliged to install the short shifter on a slightly inclined surface, place wooden blocks in front or behind the wheels to prevent the car from moving while you’re working.
(more…)
TWM Performance Short Shift Kit 2003 and up Mazda 6 Installation Manual
August 4th, 2008 · No Comments
Mitsubishi V6 Plenum Removal Guide for 8G Galant’s & 3G Eclipse’s
June 22nd, 2008 · No Comments
Tools required:
• ratchet with 10mm, 12mm, & 14mm sockets
• spark plug socket (17mm??)
• 3″ & 9″ extensions for ratchet
• pliers ‐ one regular and one needle nose
• jewelers flathead screwdriver
• can of compressed air or air hose (optional)
• can of carburetor cleaner
• clean rags and newspaper
• one quart size plastic bottle like motor oil or a sturdy piece of wood or simular about that height used to prop up the air intake plenum
• security code (if you have stock radio)
• one tiewrap if you have to cut the one under air intake hose (optional)
(more…)
