This kit is intended for use in applications where a remote mounted idle air control motor is necessary, and an ecu with the ability to control a Honda idle air control motor is being used. These instructions will specifically go over the ecu setup for an AEM EMS, though it can also be used with other systems such as Motec or Haltech.
(more…)
T1 Race Development Remote Mount IAC Kit
November 20th, 2009 · No Comments
93-97 Honda Accord SOHC, DOHC, VTEC, Non-VTEC, 2.2L PowerAir Throttle Body Spacer
November 18th, 2009 · No Comments
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Disconnect electrical connectors to throttle body & factory intake tube. See Fig#1
3. Using a 10mm socket, remove two bolts holding throttle cable bracket to intake manifold. Retain bolts for later use. See Fig#2
4. Remove throttle cable(s) from throttle body.
5. Using a Phillips screwdriver, loosen hose clamp on factory intake tube & remove tube from throttle body & air box. See Fig#3
(more…)
