This kit has been engineered to be an easy, bolt on upgrade to your standard Jackson Racing supercharger kit. It will raise your boost approximately 2 psi. As such, it has been designed to be a “Race Only” kit. Because of the “Race Only” design criteria, the C.A.R.B. Exemption Order number supplied with your Jackson Racing Supercharger Kit does NOT cover this product. Therefore, this racing boost upgrade is legal in California only on racing vehicles, which may never be used upon a highway. Other states may have laws governing the use of this product. Check local regulations before installation. Our kit was designed with and performs best when used with a good header, cat-back exhaust, and a good high flow air filter. Other non-specified accessories or engine components may affect your specific boost and horsepower output.
(more…)
99-00 Civic SI-B16A2 Boost Upgrade Installation Instructions
December 16th, 2009 · No Comments
Honda Throttle Linkage Kit Instruction
November 3rd, 2009 · No Comments
Thank you for your purchase of the complete Honda engine linkage kit. This kit is designed to fit both the 120&160 engine platforms. The only difference you will find between the 120 and the 160 engine is the direction the cable adjustment block is installed on the engine block.
1. Remove the stamped factory linkage plate and related hardware.
2. Check your carburetor and confirm the throttle arm (black plastic molded arm on the top of the throttle shaft) is in good working condition.
(more…)
1999-2004 Mustang GT Nitrous System
July 9th, 2009 · No Comments
Why our nitrous system is better:
• A complete 1999-2004 Mustang GT specific nitrous system. Everything is included in this kit for a safe, easy, plug and play installation.
• Adjustable from 75-175 horsepower. Safe enough for stock engines, powerful enough for racing use.
• Uses a custom made Ford fuel rail adaptor. This component gives easy access to the fuel system for nitrous system hook-up, especially the 2003-04 models.
• The 1999-2004 Mustang GT Nitrous System is activated at wide open throttle with advanced electronics that monitor your throttle position sensor (TPS); easy and safe activation.
• Unique nozzle design has “Active Fuel Control™” built in. This feature monitors bottle pressure and when the nitrous system is engaged, it adds or subtracts enrichment fuel so the engine never runs too rich or too lean.
(more…)
Ford 4.6L/5.4L 3 Valve engine cam phasers
July 8th, 2009 · No Comments
Ford’s cam phasers are specially designed, computer-controlled cam gears that have the ability to adjust camshaft position (centerline – advance or retard) while the engine is running. They are used on all 2005 and newer, Ford 3 Valve Modular engines. Since the Modular 3V engine uses two camshafts, one phaser is required for each camshaft - two cam phasers per engine.
(more…)
Acura RSX Nitrous Oxide System
November 6th, 2008 · No Comments
Kit Number 05126NOS is intended for 4 cylinder 2000-2005 Acura RSX applications. This kit was designed to be used on late model multi-point fuel injection type engines with 43 psi ± 5 psi fuel pressure.
NOTE: This nitrous oxide injection system injects a mixture of nitrous oxide and fuel into the air intake duct. If the instructions are not carefully followed, poor mixture distribution can occur resulting in variations of air-fuel ratio from cylinder to cylinder. In extreme cases intake manifold backfires can occur if the instructions are not followed exactly.
(more…)
