Automotive Manual PDF

Removal of Factory Intake
1. Turn the ignition OFF and disconnect the vehicle’s negative battery cable.
2. Unclip the six over center clamps, then remove the air cleaner lid.
3. Remove the air injection pump hose from the stock intake tube.
4. Remove the crank case vent hose from the stock intake tube.
5. Loosen the hose clamp at the throttle body, then remove the intake tube and filter.
6. Remove the solenoid from the lower air cleaner assembly.
7. Unclip the wire harness from the lower air cleaner assembly.
8. Unclip the vacuum hose from the rear of the lower air cleaner assembly.
9. Remove the three bolts that secure the lower air cleaner assembly.
10. Remove the lower air cleaner assembly.
11. Remove the stock rubber hose from the crank case vent on the cam cover and from the hard line.
(more…)

[Read more →]