This installation manual covers the installation of all Hondata stages. Some information in this manual will not apply if you are not installing all the Hondata features.
Shift light
This is a high intensity LED wired in parallel with the factory check engine light. At a certain rpm the LED will light as an indication of when you should change gear. The shift light rpm can be set with a dash mounted push button.
(more…)
Hondata Installation Manual
November 2nd, 2009 · No Comments
Honda Car2PC-HON1 adapter for Car PC & AUX Interface for MP3 player Installation Instructions
October 31st, 2009 · No Comments
Preparation
1. Turn off car engine and remove key from ignition
2. Un-mount your radio from the dash in order to get access to the back side of the radio.
Adapter installation
3. Attach square 14 pins connector to the back of the Honda stereo.
4. Find a place where you can place Car2PC. In many cars there is enough room in the dash to place Car2PC.
Note: Make sure you mount Car2PC in a place with enough room so when you mount the car stereo back you do not break the adapter
(more…)
