On most models, access to the 3-pin plug of the headlamp is possible simply by reaching it from underneath the front fairing or from behind the dash. There is usually a rubber splash cover over the 3-pin plug, which has to be peeled back. Installation is simple: unplug the headlamp, insert pathBlazer, and then re-connect the 3-pin plug.
(more…)
P115W pathBlazer application Installation
November 6th, 2009 · No Comments
RS900ERII/RS901II Series II Remote Engine Starting System Installation Instructions
December 28th, 2008 · No Comments
PROGRAM/OVERRIDE SWITCH: 2 PIN PLUG
This switch is used primarily for programming features of the RS900/901. However, if the Anti-Grind/Starter disable feature is installed, you MUST INSTALL this switch. This switch will allow the user to override the starter disable in the event of a non-operating remote control.
(more…)
