Before installing a big bore kit, you should first install a high volume oil pump. A high volume oil pump will deliver up to 300% more oil to your top end which will only help preserve the life of your engine. To install the big bore kit you will need to:
1. Stuff a CLEAN rag behind the piston to seal off the crankcase.
2. Install a c-clip into one side of the piston. When installing the c-clip, compress the c-clip just enough to get it into the piston. Note the position of the c-clip once it is installed.
(more…)
Big Bore Kit Install Instructions
November 24th, 2009 · No Comments
1992 Mazda 323 Protege Workshop/Wiring Manuals
August 2nd, 2008 · No Comments
Connecting Rod
1. Install one piston pin clip into the clip groove in the piston.
2. Assemble the piston and the connecting rod, a ligning the oil groove in the large end of connecting rod opposite the âFâ mark on the piston.
3. Apply clean engine oil to the piston pin.
4. Install the piston pin from the side opposite the clip.
5. Tap the piston pin in with the SST until the pin contacts the clip. If the pin cannot be installed easily, replace the connecting (more…)
