Preparation:
a) Lock rear parking brake on quad, turn gas petcock to Off and stand quad upright on the rear grab bar. Make sure vehicle is secure and will not fall over while installing your new skid plate.
b) Remove OEM bolts mounting the OEM Frame Cover to the Frame using a 10mm socket wrench. You may discard the OEM mounting bolts and plastic frame cover.
(more…)
HONDA TRX450R Frame Skid Plate Installation Instructions
November 8th, 2009 · No Comments
05-07 Ford Focus Gauge Faces Installation Instructions
August 10th, 2009 · No Comments
This is just a guideline for replacement of the gauge faces on the Ford Focus. Please don’t hold me responsible for anything that may go wrong while following these instructions. These instructions are for entertainment usage only. If you learn something from these instructions, congratulations.
1. The panel under the steering wheel will have to be removed. This is the panel to which the hood release is attached. Once this has been removed, you can access the bolts along the bottom of the panel that surrounds the gauge cluster. Don’t forget the bolt over by the headlight switch. Once the bolt shave been removed, grab the trim piece around the cluster and pull it towards you. The whole piece will unclip and separate from the dashboard. Unclip the trunk/hatch release button (if so equipped). You can now access the bolts that hold the cluster into the dash.
(more…)
Volvo C-30 FMIC Install Guide
December 9th, 2008 · No Comments
Procedure: Installation for the ATP direct replacement high flow/high density front mounted intercooler assembly on the 2007 and newer Volvo C30 / S40 T5 Model
Purpose of this upgrade: This ATP FMIC upgrade features a Garrett GT spec intercooler core that is much more thermally efficient in cooling the turbo charged air than the factory FMIC. The result is a drastic reduction in charge air temp which equates to a denser charge, more power, less engine knock, and increased engine reliability.
(more…)
