Automotive Manual PDF

RSS Feed

The Resources for Automotive

Ford 4.6L/5.4L 3 Valve engine cam phasers

July 8th, 2009 · No Comments

Ford’s cam phasers are specially designed, computer-controlled cam gears that have the ability to adjust camshaft position (centerline – advance or retard) while the engine is running. They are used on all 2005 and newer, Ford 3 Valve Modular engines. Since the Modular 3V engine uses two camshafts, one phaser is required for each camshaft – two cam phasers per engine.
(more…)

[Read more →]

1997-03 Ford F150/F250 L.D.4WD Torsion Key Front Lift/Leveling Kit

June 28th, 2009 · No Comments

Due to the wide on-vehicle adjustment range of this product,a “floating” feature has been designed into the adjustment system. This feature allows the Forged Adjuster & Bolt assembly to reposition in the crossmember as ride height adjustments are made.

Important! Ford/Lincoln vehicles with factory Air Suspension systems require an alternate installation procedure. Only install this product and adjust ride height
(more…)

[Read more →]

Figure’s 2006-Present Acura TSX Custom Grille set

November 5th, 2008 · No Comments

Scion xB Figure Grille Installation
1) Upper Center Grille
1.1) Remove OEM Grille. Begin by opening the hood. Remove the radiator cover that fits above the OEM grille. The radiator cover is held in place by a series of pop-top fasteners. Remove these by following the procedure shown in Figure 1. Finally, there are additional pop-top fasteners and two 10mm bolts that hold the OEM grille in place. Remove these and then remove the grille.
1.2) Prepare bumper for installation. Once the OEM grille is removed, drill two 1/8” holes in the locations shown in Figure 2. These holes will be used to secure the Figure Grille. If you ever need to re-install your OEM grille, these holes will be completely hidden and will not interfere in anyway.
(more…)

[Read more →]