This publication contains instructions for the proper method of loading and securing Volkswagen and Audi vehicles. Methods other than described and illustrated are not acceptable.
1. To ensure receipt of the proper vehicle, all Volkswagen/Audi vehicle identification numbers (V.I.N.) are located on the dashboard visible through the driver’s side lower windshield. 17 digit V.I.N. number – example – 3VWRT71K17M838290
2. Personnel must wear clean clothing free of objects that could cause damage to the interior or exterior of the vehicle. Gloves are not to be worn inside the vehicle. Jewelry, if worn, and belt buckles, must be covered by protective devices. Smoking inside vehicles is strictly prohibited.
(more…)
[Read more →]
INSTALLATION INSTRUCTIONS
1) Raise the vehicle. Use ramps or a jack and jack stands. NEVER work under a vehicle that is supported by the jack.
2) Remove the stock shift knob from inside the vehicle by twisting it counterclockwise.
3) Underneath the car, remove the bolt that attaches the shifter to the shift rod. Move the shift rod out of the way.
4) Remove the two locknuts and the shift ball holder plate. Pull the stock shifter out taking care to not damage the shift boot inside the car.
(more…)
[Read more →]
Removing a transmission and replacing a clutch is a complex and time-consuming procedure. By replacing it yourself, you alone are responsible for the safety and functionality of yourself and vehicle. If you do not want to take that chance, I recommend that you take you car to a Nissan certified mechanic. This article was written after my clutch was replace and the transmission was re-installed. It is very possible that I left out a few steps or remembered them differently. Read the entire article before starting, you may find something too challenging for your level of skill.
(more…)
[Read more →]
