Automotive Manual PDF

Install plastic brake cable guide (7) in rear of middle body mount. Install new parking brake cable guide (24) in existing frame hole as shown. Remove forward most brake cable guide and replace with new guide (6). Install driver side front linkage in first sheetmetal tab / hole from front. Install threaded clamping plate (13) on top of pinch weld and thread fastener ( 10) into clamping plate and torque to 16 ft-lbs. (22 N m). Next install fastener (12), finger tighten only.
(more…)

[Read more →]

To suit Ford F150 vehicle model year MY04 Preparation Step 1 Insert a flat blade screwdriver into the hole at the top of the cover plate behind the door handle lever to remove the cover plate. Step 2 Lift the front corner of switch panel. Pull the switch panel up and out from the door trim panel. Step 3 Disconnect electrical connectors from the switch panel and set the switch panel aside. Figure 1 Figure 2 Step 4 With a 10 mm socket, remove the screw from the switch panel hole. Step 5 Using a 6 mm socket, remove 2 x screws at the lower edge of the door trim panel.
(more…)

[Read more →]