Automotive Manual PDF

STOCK EXHAUST SYSTEM REMOVAL
1. Remove frame cover.
2. Remove right side footpeg assembly held in place by two bolts (Figure 1).
3. Remove exhaust port nuts.
4. Remove bolts securing rear muffler to exhaust system mounting bracket.
5. Remove complete exhaust system. Begin by lifting muffler out of mounting bracket locating hole (assistance may be required).
6. Check condition of stock exhaust gaskets. Replace if damaged or worn.
7. Remove two bolts attaching stock exhaust mounting bracket to frame.
(more…)

[Read more →]

Prior to installation, be sure your vehicle is parked on a level surface, and the exhaust system is cool. For safety purposes and ease of installation, we urge you to take your vehicle to a qualified service center or muffler installer that employs the use of a lift.

Exhaust System Removal:
1. Measure the exhaust pipe 7-1/2 inches forward of the rear axle and mark a line.
2. Using a saw or chain style pipe cutter, cut the stock system.
3. Using a 15 mm socket remove the two flange nuts.
4. Remove the front hanger from the rubber isolator and remove the front section of the stock exhaust system.
5. Remove the rubber isolator after the axle from both the vehicle and the exhaust system (See Fig. D).
(more…)

[Read more →]