Upon receipt of the Rocket Locker, the casting and the light should already be assembled and wires should be fed thru casting.
Step 1: Feed wires thru hole in the oval gasket.
Step 2: Install Allen head bolts through the hole in Rocket Locker casting, plastic oval gasket, and rubber expander.
Step 3: Install threaded back plate on Allen head bolt. Snugly tighten the back plate against the rubber expander.
Step 4: Remove the tail light lens. To do this, open tailgate and remove the screws that hold the lens in place (refer to picture below). If you are not sure which screws hold the lens in place refer to your owner’s manual on how to replace tail light bulbs. Then release the tabs on the other side of the lens.
(more…)
Rocket Locker Side Rails Installation Instruction
October 25th, 2009 · No Comments
2004–2005 MY Golf, Jetta and New Beetle with TDI Engines Replace EGR Cooler
August 20th, 2008 · No Comments
We are writing to inform you of an emissions recall on some 2004-2005 model year Volkswagen Golf, Jetta and New Beetle TDI engine vehicles. Our records show that you are the owner of one of these vehicles.
What Is The Problem?
The EGR cooler on affected vehicles has the potential to develop an internal leak. If this happens, the MIL light may come on, and the vehicle may exceed Federal and/or California emissions standards.
(more…)
