This kit provides the SOLUTION for eliminating air conditioning and power steering on motors found in the 02-06 RSX, ITR and CTR while:
-Relocating the alternator to avoid headlight material removal on 1988-1991 Civics & CRXs
-Eliminating pulley-to-hood interferences on 1988-1991 Civics and CRXs with a K20 engine
-Eliminating individual throttle body interference issues
-Offering a compact yet robust design for overall cleanliness and reliable operation.
(more…)
K20A/A2/Z1 A/C and P/S Removal Kit Installation Instructions
November 16th, 2009 · No Comments
Ducati Monster Bobbed License Plate / Signal Relocation Bracket - Redpoint Racing
January 26th, 2009 · No Comments
The relocation bracket is designed to fit all Ducati Monsters within the year ranges of 2000-2004. It may fit other years as well, but I cannot guarantee an exact fit as minor changes have been done throughout the years. The bracket is designed to replace the stock tail light/turn signal/license plate assembly and the rearmost section of the frame on which the stock assembly mounts. It is assumed that the sub frame has already been removed.
(more…)
1999-2000 Chevrolet/GMC Silverado/Sierra 3/4 Ton 3″ Body Lift Kit
July 16th, 2008 · No Comments
1. Remove negative battery cable, then positive battery cable from the battery. If equipped, the Supplemental Restraint System will be deactivated when the battery is disconnected.
SteeRIng extenSIon
2. Remove the nut and bolt holding the steering column to the steering shaft located in the engine compartment about 8 inches down from the firewall. Mark the two shafts for realignment.
(more…)
