1. Locate the oil filter flange on your motor and find the stock oil pressure sender. To access this location fully, certain emissions devices or the intake manifold may need to be removed. Remove the wiring harness from the stock oil pressure sender and move aside. Using a 24mm deep socket, unscrew the sender.
2. Install the included M10×1 adaptor in the stock oil pressure sender port. Start threads by hand and tighten snug using an open end wrench. Do not over tighten this adaptor! Install one end of the 12” extension hose and use an open end wrench to tighten.
(more…)
42Draft Designs VW M10×1 Oil Pressure Relocation Kit (42-004) Installation Instructions
December 3rd, 2008 · No Comments
Battery Relocation Instructions
September 10th, 2008 · No Comments
The LPE C5 Corvette battery relocation kit improves vehicle weight distribution by moving weight to the rear of the vehicle. The improved weight distribution increases traction for better acceleration along with providing improved handling and braking. The installed kit safely mounts the battery in the rear storage well of the Corvette and, in those applications equipped with the storage well cover, fits under the existing rear storage well cover for a clean and stock appearance.
(more…)
