Automotive Manual PDF

RAID (RENAULT ANTI-INTRUDER DEVICE)
You must first decide if you want to activate this function.
To activate
With the ignition on, press the central door locking button 1 on the locking side (red dot) for about 5 seconds, until you hear the beep.
To deactivate it
With the ignition on, press the central door locking button 1 on the unlocking side (opposite the red dot) for approximately 5 seconds, until you hear the beep. If you decide to keep the doors locked when you are driving, remember that it may be more difficult for those assisting you to gain access to your vehicle in the event of an emergency.
(more…)

[Read more →]

KEYS / REMOTE CONTROL DOOR LOCKS
1 Radio frequency remote control locking unit, ignition key, key for doors, luggage compartment and fuel filler flap.
2 Ignition key, key for doors, luggage compartment and fuel filler cap.

If there is a child (or animal) in the car, never leave it unattended with the key in the ignition. With the key in the ignition it would be possible to operate electrical equipment such as the window risers and there is a risk that the child may be seriously injured (by trapping his or her neck, arm, hand, etc.).
(more…)

[Read more →]

AUTOMATIC LOCKING OF OPENING ELEMENTS WHEN DRIVING
You can decide if you wish to activate the function.
To activate it
With the ignition on, press the locking side (red dot) of door central locking button 1 for approximately 5 seconds until you hear a beep.
To deactivate it
With the ignition on, press the unlocking side (opposite the red dot) of door central locking button 1 for approximately 5 seconds until you hear a beep.
(more…)

[Read more →]

The repair methods given by the manufacturer in this document are based on the technical specifications current when it was prepared. The methods may be modified as a result of changes by the manufacturer in the production of the various component units and accessories from which his vehicles are constructed.
(more…)

[Read more →]

Technical Note 3676A CB1N Basic manual: Workshop Repair Manual 345 and Technical Note 3286A Features of Renault Clio Sport SPL lighter version (see manufacturer’s plate) | The injection computer receives a signal from the power steering pressure switch (which can be displayed on the diagnostic tools). The injection computer does not adjust the engine idle speed.
(more…)

[Read more →]

Laguna Coupé Concept: elegance, driving pleasure and peace of mind - Kangoo Compact Concept: light, airy, and in pursuit of leisure New models - Clio Sport Tourer: appealing, energetic, roomy and practical - New Kangoo: more practical, more comfortable Powertrain V6 dCi Concept : exceptional performance and supreme driving pleasure - Four-wheel Active Drive chassis Clio Sport Tourer: appealing, energetic, roomy and practical Renault is giving Clio Sport Tourer its world premiere at the 2007 Frankfurt Motor Show. This estate-car version of Clio draws on the strengths of the Clio III family in terms of road-holding, roominess, ride comfort, and safety. Clio Sport Tourer is one of the most compact cars of its kind on the market.
(more…)

[Read more →]

Workshop Repair Manual should include the following manuals: General information Panelwork Mechanisms and accessories Sealing and soundproofing Trim and upholstery XM0B -XM0C -XM0F -XM0G -XM0H -XM0J -XM0U General information 01C 02B 03B 04E 05B Panelwork 40A 41A 41B 41C 41D 42A 43A 44A 45A 47A 48A VEHICLE BODY SPECIFICATIONS BODY INNOVATIONS IMPACT PAINTWORK BODYWORK EQUIPMENT AND TOOLS GENERAL INFORMATION
(more…)

[Read more →]

ALL TYPES except N engine Adjust the various instrument panel functions (clock, etc…) if necessary. Check that all the instrument panel functions operate correctly. AFTER REPAIR FAULT FINDING CHARTS no CHART 7 SPEEDOMETER PROBLEM (vehicles fitted with an electric speedometer). Needle vibrates or oscillates or no needle movement and total mileage recorder does not operate. Check that the system connectors are engaged correctly. Take care not to damage the connectors during checks.
(more…)

[Read more →]

The repair methods given by the manufacturer in this document are based on the technical specifications current when it was prepared. The methods may be modified as a result of changes by the manufacturer in the production of the various component units and accessories from which his vehicles are constructed
(more…)

[Read more →]