Automotive Manual PDF

This appliance is equipped with a three-prong grounding plug for protection against possible shock hazards. If a two-prong wall receptacle is encountered, the customer is required to contact a qualified electrician and have the two-prong wall receptacle replaced with a properly grounded three-prong wall receptacle in accordance with the National Electrical Code. Room air conditioners are designed to operate according to the requirements on the nameplate and as shown in Table 1.
(more…)

[Read more →]

On 2001 vehicles without the diagnostic connector in the engine compartment, the use of the SIA reset tool is not possible. The service indicator may be reset using the reset mode in the instrument cluster.
(more…)

[Read more →]

Initial System Start-Up
Immediately after installing or applying power to the unit, it should be initialized. To do this, first, remove the detachable front panel. Behind the front panel, to the right of the connector, there is a small hole. Using a pencil or other pointed object, press the red reset button mounted behind this hole to complete the initialization procedure.
(more…)

[Read more →]

BMW Owners Manuals - Production Date: E46 from 9/99 E38,E39,E53 from 9/00 On 2001 vehicles without the diagnostic connector in the engine compartment, the use of the SIA reset tool is not possible. The service indicator may be reset using the reset mode in the instrument cluster. Reset procedure for high and low clusters with SIA III using the Reset Mode: • Ignition key must be “off” • Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position. • Keep the button pressed for approximately 5 seconds until one of the following words appear in the display: “OIL SERVICE, or
(more…)

[Read more →]