Automotive Manual PDF

1. Exercise extreme caution and common sense when working around gasoline. Extinguish all open flame or other sources of ignition and be sure to perform the following steps in an area with adequate ventilation. Personal protection in the form of eye protection and fuel resistant gloves are strongly recommended.
2. On the right (passenger) side of the intake manifold, locate the fuel pressure test port. CAUTION! The fuel in the system is under pressure! Relieve the pressure in the fuel system by depressing the check valve with a screwdriver and collecting the fuel with a shop towel.
(more…)

[Read more →]

1. Start the supercharger installation by installing the upgraded fuel pump. Ensure that the fuel tank is less than 1/8” full (preferably empty) by checking the fuel level gauge. Even though the gauge may read empty, some residual fuel will be present in the tank. Exercise extreme caution and common sense when working around gasoline. Extinguish all open flame or other sources of ignition and be sure to perform the following steps in an area with adequate ventilation. Personal protection in the form of eye protection and fuel resistant gloves are strongly recommended.
(more…)

[Read more →]

This high flow fuel pump module fits 1997 to 2003 model year Chevrolet Corvettes. During the 2003
model year GM made a change to the Corvette fuel system. This module will not fit the later 2003
vehicles. The 2003 model year C5 fuel system change over occurred on November 25, 2002. If your
car was built on or after this day, you have the newer fuel system and this module will not work in your
vehicle. If your car is a 2003 model year car and the last six (6) digits of VIN are 114930 or higher, you
have the newer fuel system and this module will not fit your vehicle. Look at page 3 of the instructions
for a picture of the 1997 to early 2003 model year fuel tank design (as seen from under the vehicle).
(more…)

[Read more →]