Automotive Manual PDF

INSTALLATION NOTE:
• Make sure the vehicle and the nose mask are clean and completely dry before installation. If moisture under the mask is allowed to dry, it may cloud the paint. If the mask gets wet, remove it and allow it to air-dry completely.
• Make sure any repainted surfaces are cured.
• Make sure the hood and nose of the vehicle have been waxed with a high-quality paste wax.
• Make sure you install the nose mask securely. If the nose mask starts to flap, or comes loose while driving, safely pull off the highway, stop the vehicle, and secure or remove the mask.
(more…)

[Read more →]

If your truck does not have a locking tailgate (like provided on many full size Fords, Toyotas and Nissans), you will need to purchase an aftermarket tailgate lock (i.e., Pop’ N Lock, Bully Tailgate Lock, etc.,) to be able to lock the tailgate shut and to secure your truck bed. These lock sets basically replace your existing tailgate handle and convert it into the equivalent of a factory installed locking tailgate. Changing these tailgate lock handles is the equivalent of changing a “door knob” in that you simply loosen the 2 bolts on the inside of the tailgate, remove your non-locking tailgate handle, and replace with one that locks. These install really easily without any drilling and you can buy these at any truck accessories store. Once the cover is closed (and latched), you just simply lock the cover, then lock up your tailgate handle and you now have a really secure trunk!
(more…)

[Read more →]

The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.”
(more…)

[Read more →]