Automotive Manual PDF

Begin by removing the small trim bezel that surrounds the radio. This bezel has four clips that hold it in place in each corner. Carefully use the dash trim panel tool and insert it in behind the bezel in the lower right corner. Note: Be careful not to mar the soft plastic that the bezel is made of when using the dash trim panel tool. Pull back toward you to release the lower right clip. Perform this same action in the other remaining three corners of the bezel. When the bezel is loose set it aside.
(more…)

[Read more →]

REMOVAL:
1. Engage the steering column / ignition switch lock with the steering wheel & wheels centered. (NOTE It may be necessary to remove the upper and lower steering shaft bolts prior to locking for accessibility)
2. Remove the stock steering assembly by removing the bolts that attach it to the steering box and steering column shafts. This connection is often rusted and may require penetrating oil or a few taps with a hammer.
(more…)

[Read more →]

When installing in a vehicle with an Auto Climate Control you will not be drilling or using the included screws. See step (3). When re-installing the auto climate control unit in the cavity you will need to apply some downward pressure on the unit so the centering pins and four factory screw holes will line up. Install the four (4) screws that secure the auto climate control then tighten. The mount will be nice and tight.
(more…)

[Read more →]