Installation Instruction:
1. Verify all the parts from the list above are present and accounted for. Please read instructions completely before starting.
2. Verify passenger and driver side bracket.
3. Locate the round holes on rocker panel for bracket installation. Insert M8 hex nut on the longer end of U-bolt. Insert U-bolt through the first hole and out through the second hole. Install M8 hex nut on shorter end of U-bolt after it comes through second (more…)
04-07 Chevy/GMC Colorado/Canyon Crew Cab Bracket Bar Installation
September 28th, 2009 · No Comments
1987-96 Ford F150/250 Pickup Dynomax Dual Kits Installation Instructions
July 5th, 2009 · No Comments
Read all instructions before starting any work.
1. Remove the exhaust system behind the catalytic converter assembly.
2. Grind or file the tab off the outlet end of the O.E. converter. Connect the intermediate pipe to the converter and clamp in place. This pipe will require cutting the outlet for the 133″ WB (standard cab, 8’ box). Cut to length after the muffler is in position (SEE #3).
3. Slip muffler hanger (36161) ends thru the rubber hangers. The clamp should be offset to the driver’s side. Install the muffler. The bracket clamps to the driver’s side outlet. Do not tighten yet.
(more…)
