Automotive Manual PDF

This chapter provides information required for the installation of the Neo Changer, it must be read by all users. Thank you for purchasing the Neo Changer. Since the Neo Changer will works in many different vehicles the following steps must be taken to ensure the changer is set up correctly for the vehicle it is being installed in.
(more…)

[Read more →]

Since the Neo iON works in many different vehicles the following steps must be taken to ensure the iON is set up correctly for the vehicle it is being installed in.
Before Installation
To prevent damage to your vehicle and the iON take the following precautions.
1. Turn off the ignition and remove the negative (-) battery cable prior to installation.
NOTE: If the vehicle is equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the battery cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution to avoid causing a short circuit during installation. If your radio has a security code make sure you know the code and how to enter it prior to removing the battery cable. The radio will require this code to operate when the battery terminal is reconnected.
(more…)

[Read more →]

Tools required:
• ratchet with 10mm, 12mm, & 14mm sockets
• spark plug socket (17mm??)
• 3″ & 9″ extensions for ratchet
• pliers ‐ one regular and one needle nose
• jewelers flathead screwdriver
• can of compressed air or air hose (optional)
• can of carburetor cleaner
• clean rags and newspaper
• one quart size plastic bottle like motor oil or a sturdy piece of wood or simular about that height used to prop up the air intake plenum
• security code (if you have stock radio)
• one tiewrap if you have to cut the one under air intake hose (optional)
(more…)

[Read more →]

From 1995 and onwards, Opel / Vauxhall vehicles are factory installed with an immobiliser. The Immobiliser-I system can be found in Astra-F, Corsa-B, Omega-B, Vectra-B. The Immobiliser-II system can be found in Astra-G, Corsa-C, Omega-B, Vectra-B, Zafira, Meriva
(more…)

[Read more →]

Installation Preparation (All Vehicles) Anti-Vibration Setup Load/Unload Magazine CHAPTER Dip-Switch Overview (REQUIRED) Acura Audi Ford (Ford, Lincoln, Mercury) GM (Buick, Cadillac, Chevy, GMC, Oldsmobile, Pontiac, Saturn) Chrysler (Jeep, Dodge, Plymouth, Eagle) Honda Toyota Volkswagen CHAPTER Troubleshooting Warranty/Warnings FCC and Legal Information Installation Preparation This chapter provides information required for the installation of the Neo Changer, it must be read by all users. Thank you for purchasing the Neo Changer. Since the Neo Changer will works in many different vehicles the following steps must be taken to ensure the changer is set up correctly for the vehicle it is being installed in.
(more…)

[Read more →]

Installation Preparation (All Vehicles) 1 Anti-Vibration Setup 2 Load/Unload Magazine 3 C H A P T E R 2 Dip-Switch Overview (REQUIRED) 5 Acura 6 Audi 7 Ford (Ford, Lincoln, Mercury) 8-9 GM (Buick, Cadillac, Chevy, GMC, Oldsmobile, Pontiac, Saturn) 10-11 Chrysler (Jeep, Dodge, Plymouth, Eagle) 13 Honda 14 Toyota 15 Volkswagen 16 C H A P T E R 3 Troubleshooting 17 Warranty/Warnings 18 FCC and Legal Information 19 Installation Preparation This chapter provides information required for the installation of the Neo Changer, it must be read by all users.
(more…)

[Read more →]