1) Scrape away the paint from two areas directly across from each other near the front of the vibration damper as shown on the back page. Roughen the bare metal with an emery cloth. Clean the magnets and bare metal on damper with alcohol to remove any oil or grease residue so that the glue will bond. Glue each magnet to the selected surface of the vibration damper with the BLUE SIDE OUT (north pole) and with the magnets directly across (180°) from each other. Be sure to align the magnets with the front edge of the vibration damper to avoid interference with the timing bracket.
(more…)
R8907 Sensor Kit For 5.7 Liter GMC Diesel Engine Using R8503 Tachometer Installation Instructions
October 20th, 2009 · No Comments
Tire Temperature Sensor Installation Guide Manual
March 25th, 2008 · No Comments
Tire Temperature Sensor Installation Introduction Technical Support Parts Installation Assembling the Sensor Wiring the Sensor Securing the Mounting Bracket and Sensor Assembly INTRODUCTION The tire temperature sensor allows you to monitor the temperature of the motorcycle tire. TECHNICAL SUPPORT For assistance, please contact Dynojet Technical Support at 1-800-992-3525, or write to Dynojet Research at 2191 Mendenhall Drive, North Las Vegas, NV 89081.
(more…)
