INSTALLATION INSTRUCTIONS
1) Raise the vehicle. Use ramps or a jack and jack stands. NEVER work under a vehicle that is supported by the jack.
2) Remove the stock shift knob from inside the vehicle by twisting it counterclockwise.
3) Underneath the car, remove the bolt that attaches the shifter to the shift rod. Move the shift rod out of the way.
4) Remove the two locknuts and the shift ball holder plate. Pull the stock shifter out taking care to not damage the shift boot inside the car.
(more…)
Short Shifter for Honda Civic / Acura Integra Installation Instructions
November 15th, 2008 · No Comments
Acura RSX Seat Heater Install
November 14th, 2008 · No Comments
Be sure to test the heaters to make sure they work properly before going to the trouble of installing them. I just connected them to my battery terminals to do a quick test. This should only take a couple minutes and is a worthwhile precaution. Additionally, I would recommend getting some upholstery hog rings and hog pliers. These can be purchased as a package from JCWhitney for about $4-5.
(more…)
TWM Performance Short Shift Kit 2003 and up Mazda 6 Installation Manual
August 4th, 2008 · No Comments
Installation of this product requires the stock shifter to be cut, and re-installation of the stock shifter requires welding. It’s preferable to park on a flat surface, as you will have to engage and disengage the hand brake and shift from gears to neutral. If you can’t do so and are obliged to install the short shifter on a slightly inclined surface, place wooden blocks in front or behind the wheels to prevent the car from moving while you’re working.
(more…)
