Steps 1 through 6 will require two or more people.
1. Cut and remove the straps. Carefully slide the unit carton off the shipping pallet. Remove the top of the shipping carton.
2. Remove the carton by sliding the carton over top of the unit.
3. Remove foam packing from around the sides of the unit.
4. Lean the Sun Machine 450 so that half of the foam base can be removed.
5. Lean the Sun Machine 450 so that other half of the foam base can be removed.
(more…)
Sun Machine 450 Serial C Pep Boys Unit Setup Installation Instructions
November 17th, 2009 · No Comments
Hauler Rack II - Universal Truck Series Racks Assembly Instructions
September 30th, 2009 · No Comments
Before you begin:
Remove all components from the shipping carton.
The rack should be assembled on a padded surface such as carpet to prevent scratching of aluminum surfaces. Remove bands securing components together.
Read the instructions thoroughly to familiarize yourself with the assembly sequence.
Note that you DO NOT tighten any nuts and bolts until the completed rack is installed on the vehicle unless specified. This allows for minor adjustments to the rack during the installation process.
Gather the following tools used to assemble and install the rack.
(more…)
1966-1977 Ford Bronco with Sport Bar Bikini Installation Instructions
August 13th, 2009 · No Comments
Before you begin installing this top assembly, read all instructions thoroughly. After completing the installation, keep these instructions for further reference. Below are a few tips to make this installation easier.
For a smooth fit:
For ease in installation, the top should be installed at temperatures above 72° F. Below this temperature, the top may contract an inch or more, making it difficult to fit to the vehicle. It is normal for a top to contract and wrinkle when stored in the shipping carton. Within a few days after the installation, the top will relax and the wrinkles will disappear.
(more…)
Supertop for Truck Installation Instructions
April 17th, 2009 · No Comments
Before you begin installing this assembly, read all instructions thoroughly.
For a smooth fit:
For ease in installation, the product should be installed at temperatures above 72° F. Below this temperature, the fabric may contract an inch or more, making it difficult to fit to the vehicle. It is normal for fabric to contract and wrinkle when stored in the shipping carton. Within a few days after the installation, the fabric will relax and the wrinkles will disappear.
(more…)
