Automotive Manual PDF

INSTALLATION INSTRUCTIONS
1) Raise the vehicle. Use ramps or a jack and jack stands. NEVER work under a vehicle that is supported by the jack.
2) Remove the stock shift knob from inside the vehicle by twisting it counterclockwise.
3) Underneath the car, remove the bolt that attaches the shifter to the shift rod. Move the shift rod out of the way.
4) Remove the two locknuts and the shift ball holder plate. Pull the stock shifter out taking care to not damage the shift boot inside the car.
(more…)

[Read more →]

It’s preferable to park on a flat surface, as you may have to engage and disengage the hand brake and shift from gears to neutral. If you can’t do so and are obliged to install the short shifter on a slightly inclined surface, place wooden blocks in front or behind the wheels to prevent the car from moving while you’re working.
(more…)

[Read more →]

Installation of this product requires the stock shifter to be cut, and re-installation of the stock shifter requires welding. It’s preferable to park on a flat surface, as you will have to engage and disengage the hand brake and shift from gears to neutral. If you can’t do so and are obliged to install the short shifter on a slightly inclined surface, place wooden blocks in front or behind the wheels to prevent the car from moving while you’re working.
(more…)

[Read more →]