The following steps need to be performed from underneath the vehicle:
• Remove the three 7 mm screws holding the front fascia inside the radiator opening.
• Next, remove the 7 mm screws on either side (one on each side). These are the screws holding the bottom of the bumper cover - see picture.
(more…)
2005-2007 Chevrolet Corvette Lingenfelter High Flow Air Intake System Installation Instructions
September 23rd, 2008 · No Comments
C6 Corvette SCIC airbox Magnuson Supercharged Applications installation instructions
September 18th, 2008 · No Comments
Disconnect electrical connector for under hood light & unclip electrical connector for under hood light from the radiator shroud. Disconnect the electrical connector from outside air temp sensor located low on the right side of the shroud. Remove the 2 “christmas tree” push fasteners holding the radiator shroud to the condenser. They are located approximately midway up along each side. Raise front of vehicle, follow manufacturer instructions. Use jack stands to support vehicle.
(more…)
